产品-标准编号

当前位置:首页>产品-标准编号

BS EN 1022:2018 Furniture - Seating - Determination of stability

时间:2020-09-17   访问量:3467
BS EN 1022:2018 Furniture - Seating - Determination of stability
Edition: 20200208 更新 
SectionSection DescriptionSummary of important content重要内容摘要
NAEuropean Foreword1. All test methods for assessing the stability of seating used in European Standards for furniture have been collated in one document.
2. Test methods for assessing the stability of office work chairs and all other seating have been harmonised.
3. A test method for assessing corner stability has been introduced for all types of chair.
1. 本标准汇集了欧洲家具标准中用于评估座椅稳定性的所有测试方法。
2. 本标准统一了评估办公室工作椅和所有其他座椅稳定性的测试方法。
3. 本标准新增了一种用于测试各种类型座椅的前角稳定性测试方法。
1Scope1. The test methods described can be used for seating for children and heavier adults by modifying test loads and loading points.
2. This document does not apply to children’s highchairs, table mounted chairs and bath seats which are covered by other European Standards.
1. 本标准所述的测试方法可以通过修改测试负载和加载点来适用于儿童和较重的成年人的座椅稳定性测试。
2. 本标准不适用于儿童高脚椅、桌椅(附着在桌子边上)和沐浴椅,这些椅子的测试方法是由其他欧洲标准规管的。
2Normative referencesNANA
3Terms and definitionsNANA
4General test conditions1. Unless otherwise stated, overturning forces shall be maintained for (5±2)s.
2. For rearwards stability tests defined in 7.4.2, 7.4.3, and 7.4.4, the loading discs shall be maintained in position for (120±60)s.
1. 除非另有说明,所有加载力应保持(5±2)秒。
2. 对于7.4.2、7.4.3和7.4.4中定义的后向稳定性测试,加载盘应在原位置保持(120±60)秒。
5Test equipment1. All loading pads shall be capable of pivoting in relation to the direction of the applied force. The pivot point shall be as close as practically possible to the load surface.
2. If a loading pad tends to slide use a slip resistant material between the loading device and the item of seating.
1. 所有的加载垫都应该能够相对于所施加的力的方向活动,且活动点应尽可能接近加载垫表面。
2. (在加载过程中)如果加载垫倾向于滑动,请在加载垫和被测试样品之间垫衬防滑材料。
SectionSection Description章节内容KW ModelKW Model Desc 产品名称图片资料下载操作视频
5Test equipment测试设备///   
5.1General一般要求///   
5.2Loading point template加载点模板KW-BSE-09 Seat Loading Point Template欧标坐具加载点模板1600340960168946.jpg 
5.3Floor(测试)地面///   
5.4Stops(样品)阻挡物///   
5.5Stability loading pad稳定性测试加载垫KW-BFM-12-04-BSSeating stability loading pad for EN坐具前稳定性测试辅助加载制具-BS EN 
5.6Stability loading device稳定性测试加载治具(包括设备)KW-BFM-12 Seating stability test table for single station单工位坐具稳定性测试台

 
KW-BFM-12-06Unit of loading mass & fixture for single seating stability testing但座位坐具稳定性加载砝码和治具套装

 
KW-BSE-29-02Seating stability test table for two-seats双座位坐具稳定性测试机1600341369204682.jpg

 
KW-BSE-29-03Seating stability test table for three-seats三座位坐具稳定性测试机(图片为双座位)

 
5.7Loading discs(稳定性测试)加载重量盘KW-BFM-05-MSChair Rear Stability Test Disc坐具后稳定性测试加载模块

 
5.8Support apparatus(稳定性测试)加载重量盘支撑结构KW-BSE-39Support appartus for reclining seat of back rest stability testing具有靠背后倾结构的坐具后稳定性测试砝码托架
1600341475333533.jpg

 
KW-BSE-59Loading supporting fixture for sofa footrest 后倾沙发垫脚支撑架(可调高度)1600341502888360.jpg

 
5.9Support for tests for reclining back rests具有后倾机构的坐具加载支撑结构KW-BFM-05-PPSupport PP sheet for reclining seat of back rest stability testing具有靠背后倾机构的坐具后稳定性测试加载塑胶膜片

 
5.10Local loading pad一般加载垫KW-BSE-04-SPLocal Loading Pad - Universal普通加载垫-万向(加弹簧)1600341568422559.jpg

 
5.11Seat loading pad座面加载垫KW-BSE-01Seat Loading Pad (Hard Wood)
大屁股加载垫(硬木)1600341585144610.jpg

 
6 
6.1Swivelling seats座面可旋转坐具///   
6.2All other seating所有其他类型的坐具KW-BSE-09Seat Loading Point Template欧标坐具加载点模板1600340960168946.jpg

 
6.3Loungers休闲椅KW-BSE-09Seat Loading Point Template欧标坐具加载点模板1600340960168946.jpg

 
6.4Determination of height of seat loading point确定坐具的座面加载点的高度///   
7Test methods for assessing stability of all seating except loungers  评估除躺椅外所有座椅稳定性的试验方法
7.1General一般要求///   
7.2Requirements要求///   
7.3Test procedures, all seating所有坐具(稳定性)的测试方法KW-BFM-12Seating stability test table for single station单工位坐具稳定性测试台

 
KW-BSE-29-02Seating stability test table for two-seats双座位坐具稳定性测试机

1600341369204682.jpg

 
KW-BSE-29-03Seating stability test table for three-seats三座位坐具稳定性测试机(图片为双座位)

1600341369204682.jpg

 
7.4Additional test procedures for seating with reclining back rests具有后倾机构坐具的附加测试方法KW-BSE-39Support appartus for reclining seat of back rest stability testing具有靠背后倾结构的坐具后稳定性测试砝码托架

1600341475333533.jpg

 
KW-BSE-59Loading supporting fixture for sofa footrest 后倾沙发垫脚支撑架(可调高度)

1600341502888360.jpg

 
KW-BFM-05-PPSupport PP sheet for reclining seat of back rest stability testing具有靠背后倾机构的坐具后稳定性测试加载塑胶膜片

 
8Loungers 休闲椅(也叫躺椅)
8.1General一般要求///   
8.2Requirements要求///   
8.3Test procedures测试方法KW-BSE-29-02Seating stability test table for two-seats双座位坐具稳定性测试机

1600341369204682.jpg

 
KW-BSE-29-03Seating stability test table for three-seats三座位坐具稳定性测试机

1600341369204682.jpg

 

上一篇:ANSI/BIFMA X5.4 - 2012: Lounge and Public Seating

下一篇:BS EN 1725:1998 Domestic furniture Beds and mattresses Safety requirements and test methods

发表评论:

评论记录:

未查询到任何数据!

在线咨询

点击这里给我发消息 售前咨询专员

点击这里给我发消息 售后服务专员

在线咨询

免费通话

24小时免费咨询

请输入您的联系电话,座机请加区号

免费通话

微信扫一扫

微信联系
返回顶部